Expert Answers about Chevrolet RV and Camper Hitch
- Front Hitch Recommendation for Fitting 1999 Chevy RV Motorhom Fleetwood Jamboree
- Your 1999 Chevy RV was built on a cutaway chassis so the front hitch part # C31016 that you referenced is a confirmed fit and will work well.
view full answer... - Hitch and E-Bike Rack for Rear of 5th Wheel Camper
- For an RV approved e-bike rack the Hollywood Racks RV Rider part # HLY64FR would work great at the rear of your camper trailer. For a hitch the best option is the Curt RV Multi Fit hitch part # 13703 which fits frame widths of between 22 and 72 inches of all styles.
view full answer... - Recommended RV Trailer Hitch for a 2008 Forest River Rockwood Pop-Up Camper
- Since your 2008 Forest River Rockwood Pop-Up Camper has a smaller bumper, the best option would be to install a frame mount hitch for a bike rack. You will want to measure the outside to outside width of the trailer frame to determine which RV hitch will fit properly.
One option for an RV hitch is the Curt Adjustable Trailer Hitch Receiver # C13701. This hitch is designed to fit frames 18 inches to 51 inches wide and features a 2 inch hitch receiver. The installation instructions for...
view full answer... - Does Curt RV Trailer Hitch # C19101 Require Stabilizer Strap
- This is a really good question. So at one point Curt did require the stabilizer strap with the hitch # C19101 as well as others but recently they got rid of that requirement so with this hitch you do NOT need to use the stabilizer strap # 18050 with this hitch.
view full answer... - RV-Rated 3-Bike Rack & Hitch for 2016 Coachman Clipper Pop Up Camper Trailer
- Curt RV hitches # C19101 and # E-100 will not work on a C-channel bumper so you may want to consider a frame-mounted RV hitch like # 13703 or one of the others shown on the linked page. These have a 2-inch receiver opening for your bike rack or other RV-rated accessory and the various model fits varying frame widths; some are bolt-on while others are weld-on products. You can confirm in your owner's manual whether Coachman rated the camper's frame for hitch installation.
A bike rack to...
view full answer... - Bike and Canoe Carrier Options for Jayco 12HW Pop-Up Camper Trailer
- We offer specialized roof racks made just for pop-up camper trailers like your Jayco 12HW and we also offer RV bike racks in several varieties.
As a starting point I suggest you confirm the weight rating for the camper top. An average adult bike can weigh 35-lbs or more, so 4 or 5 bikes along with a canoe can present a significant weight load for the camper's top.
A great-value camper rack comes from Swagman, their Roamer LT Roof Rack for Pop-Up Campers # S80510. This square bar rack...
view full answer... - Hitch Recommendation For 2020 Rockwood Mini Lite 2511S
- Our most popular aftermarket trailer hitch for RVs is the CURT # 13703 Adjustable Width Hitch. It's a Class III frame mounted hitch that is rated for the use of hauling RV accessories (such as bike racks, bbq grills, etc).
It has an adjustable width up to 72" wide and should fit the frame of your Rockwood Mini Lite.
view full answer... - Bike Rack Solution for Carrying 5 Bikes at Rear of 5th Wheel Camper
- Since there aren't any RV approved 5 bike racks your best option would be a ladder bike rack like the # SP501BR to carry two of the bikes and then a hitch bike rack approved for RV use like the Yakima Longhaul part # Y02476 and you'd be set.
view full answer... - Adding Hitch And Wiring to Camper For Towing PWC
- If you are using the Curt RV Bumper 2" Trailer Hitch Receiver, # E-100, to tow your jet ski trailer and need to connect lights, I suggest the Curt Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 60" Wire Lead
Item # C58044. With this, you can wire from your camper to the PWC. It is a straight forward hard wire set-up that has the easy splice connectors in the kit.
Note the attached product review video and help article I linked below.
view full answer... - Swagman Platform Hitch Bike Rack Recommendation for Rear of RV Bumper Hitch
- If the RV bumper is a motorhome bumper then yes, the Swagman XC bike rack part # S64650 will work well there. If the bumper is on a camper trailer then the closest similar bike rack that would be rated as compatible would the be the Swagman Dispatch Bike Rack part # S44FR. Not all bike racks are rated for the rougher ride quality at the rear of a camper trailer but the Dispatch is and it's a great bike rack similar to the XC. Check out the review video I attached for more info as well.
view full answer... - Recommended Trailer Hitch for Triple Towing with Camper
- The Adjustable Width Trailer Hitch Receiver part # 13703 is great for trailers as it works with all different frame types and widths. It has a 3,500 lb weight capacity with 350 lb tongue weight rating. It can be bolted or welded. This is our most popular trailer hitch for campers and RV's. You'll also want the Curt Vehicle Wiring Harness part # C58044.
view full answer... - Recommended Bike Racks for 2014 Forest River Flagstaff RV
- I have a couple great options for transporting your bikes with your 2014 Forest River RV.
The Swagman Original - 4 Bike Rack # S64400 that you referenced in your question is rated for use with campers and RVs. If you want to continue using this rack on the back of your RV, you will simply need to install a trailer hitch. The Curt Adjustable Width Trailer Hitch Receiver for RVs # 13703 is a great option. The heavy-duty side brackets on this hitch allow for maximum adjustability as they...
view full answer... - Recommended Trailer Hitch for Coleman Camper
- For your Coleman Camper, I recommend the Curt Adjustable Width Trailer Hitch Receiver # 13703. This particular Class III hitch is specifically designed for RVs and trailers and will fit frame widths of 22 to 72 inches. The hitch can be bolted onto the trailer frame with the included hardware or welded on for a no-drill application. It features a 2 inch receiver opening and a tongue weight capacity of 350 pounds.
Please just note that Curt does require the use of a stabilizing strap #...
view full answer... - Best Way to Carry E-Bikes at Rear of Camper
- For carrying e-bikes at the rear of a camper the best solution will be to go with an e-bike rack that is approved for use at the rear of a camper like with the Hollywood Racks RV Rider part # HLY64FR which was designed for the rougher ride quality at the rear of campers, has a weight rating that is higher for e-bikes, and is very secure and wouldn't allow any movement of the bikes loaded on it.
You would need a 2 inch hitch installed on the camper like with the Curt # 13703 which fits...
view full answer... - Recommended RV Bumper Hitch for 2021 Aliner Expedition Camper
- I believe the 2021 Aliner Expedition Camper has a 2" by 4" bumper. Providing your bumper can support the attachment and weight, I highly recommend an RV Bumper Hitch, # C19101. This is a very cost effective way of adding a hitch to a small camper for attachments such as bike racks or cargo carrier, # e98874. This has a maximum tongue weight of up to a full 350 lbs.
If you do not already have a bike rack that is rated for use on a travel trailer, please let us know and we will be glad...
view full answer... - Recommended Weight Distribution With Sway Control For a RV Camper With 1,450LB Dry Tongue Weight
- With the dry tongue weight on your camper being 1,450lbs from the manufacturer the only option we carry is going to be the Blue Ox SwayPro Weight Distribution # BXW2003. This hitch is rated for a camper up to 20,000lbs but more importantly the tongue weight capacity is 1,500-2,000lbs. Your tongue weight will easily exceed the 1,500lb minimum after the dealer installs a battery and fills the propane tanks.
view full answer... - Four Bike Rack for my Camper Bumper
- We have options available that will allow for the carrying bikes on the back of your camper but the Swagman Platform-Style 2 Bike Rack part # S64663 does not have an expandable feature.
Instead the Swagman Trailhead 4-Bike Rack for 2" Hitches part # S63381 paired with the Curt RV Bumper 2" Trailer Hitch Receiver part # E-100 will allow you to transport 4 bikes behind your camper and also like on a vehicle like the other Swagman you looked at. Of course if you have carbon frame bikes you...
view full answer... - Scooter Carrier that Can be Used at Rear of Camper RV Hitch
- The Ultra-Fab Dirt Bike Carrier for 2" Hitches part # UF48-979033 is the only RV approved motorcycle carrier we offer which will work great to carry a scooter.
Then to carry bikes you'd want the Lippert Jack-It part # LC429756 as it attaches to jack mount and can carry two bikes up front.
view full answer... - What Hitch Receiver Will Fit My 1998 VW Rialta RV
- If it is confirmed that your RV can handle a hitch receiver, you can install something like the Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2", part # C13701. This hitch receiver will fit RV's with frame widths of 18" - 51". This is a bolt on hitch receiver.
You will have to contact your RV manufacturer with the VIN to find out the RV's towing capacity and tongue weight, if you do not have the information in your owner's manual.
I have included a product...
view full answer... - Trailer Hitch Receiver To Carry A Bike Rack On A 2005 Jayco Jay Feather 23B Camper
- For your 2005 Jayco Jay Feather 23B Camper I would use the Curt Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide # 13703. This is a universal trailer hitch receiver that can fit frame widths from 22" up to 72". This has a lot of great reviews from customers using this on a Jayco Camper. It can be easily bolted onto the camper's frame or it can be professionally welded on for a permanent installation. The max tongue weight is 350lbs which you do not want to exceed. One thing...
view full answer...
Go To Results